Magnetic Pump, 304 Stainless Steel, Fully Sealed Structure, Advanced Performance, Wear Shaft, Industrial Home Brew, Magnetic Materials, for Water Condiments Brewing

[Equipped with Magnetic Materials] Motor shaft and impeller are attracted and coupled for efficient operation. [Special Ceramic Materials] Strong wear and ​​ resistance for shaft bearing. [Advanced Performance] Suitable for industrial and household equipment, meets high brewing standards. [Fully Sealed Structure] Ensures no liquid leakage, making the brewing process safer and more hygienic. [Pump Head Filled with Liquid] Not self priming, must be filled with liquid for proper impeller function. Spec: Item Type: Magnetic Pump Material: 304 Stainless Steel + Motor + Ceramic Weight: Approx. 1978g / 69.8oz Use Range: It can only be used in water or condiments. Heating Temperature: 0 140 ℃ (32 ℉-284 ℉) Barb End: Support Maximum Capacity: 16/19 L/Min Rated Capacity: 8/12 L/Min Maximum Head: Approx. 2.7m (8.9ft) / 3.4m (11.2ft) Rated Head: Approx. 1.5m / 4.9ft Rated Power: 10W Rated Current: 100/120mA Rated Speed: 2600/3000rpm Product Size: Approx.6.6x16.5x7.9cm/2.6x6.5x3.1in Package List: 1 x Brewing Accessories 1 x English Manual How To Use: This pump is not a self‑priming pump. Before running the pump, the pump head must be immersed in water. Install the pump approximately 12 inches below the liquid container. 1. Open the valve and let the liquid enter the pump first. 2. Start the water pump. 3. Let the liquid ​​ through the propeller. If there is no ​​ in the outlet pipe, turn off the pump immediately and refill it later. Note: 1. It is forbidden for the magnetic pump to empty the conveyed material (the pump is closed when the outlet valve is closed). 2. Continuous operation of the magnetic pump is recommended; frequent opening/closing opportunities greatly reduce the life of the pump. 3. The temperature change of the pump suction medium should be controlled within 100°C, and the high temperature should not

• [Equipped with Magnetic Materials] Motor shaft and impeller are attracted and coupled for efficient operation.
• [Special Ceramic Materials] Strong wear and resistance for shaft bearing.
• [Advanced Performance] Suitable for industrial and household equipment, meets high brewing standards.
• [Fully Sealed Structure] Ensures no liquid leakage, making the brewing process safer and more hygienic.
• [Pump Head Filled with Liquid] Not self priming, must be filled with liquid for proper impeller function.